The airplanes that I am fortunate enough to be able to fly right now while building.
Just having Fun on another morning trip for breakfast.
Custom built from plans only by Harry Treichel in Edmonton Alberta (A friend of my father)
Calvin Thorne 56 Rolling Range Est. Cochrane, Alberta, Canada, T4C 2A3,
Phone or Fax(403) 932-4325
| NAV CANADA | C.O.P.A. | R.A.A. CANADA | AVIATION MUSEUM |
I Will Be Building A Custom Aircraft Project Starting February 98
The photo below is The 'VISION' prototype that was
designed and built by Steve Rahm and is flying in Florida.
Below is Sean Ponsonby's finished plane with a Lycoming 0-320 engine in it flying in Florida.
Photos of my "Vision" aircraft construction will be posted from time to time below.
Building and
Photo Record
-
Photos of Fuselage
- Photos of Canopy and Panel Construction Photos of Wing PART I- Updated February 2, 2007
- Photos of Wing PART II- Updated October 1, 2009
- Wing to Fuselage Mating- Updated January 25, 2011
- Photos of Landing Gear, Eng. Mount, Wheels and
Brakes-Updated October 4, 2007
- Photos of Engine, Prop & Firewall - Updated January 25, 2011
- Panel & Interior - Updated January 25, 2011
Please Visit These Contributing Supplier Companies
- RST Engineering (Antennas etc. you can build for the inside of your aircraft)
Web Site by CBT